Using the additive in the manufacturing process is easy to do and usually does not require equipment modification. The EcoPure® additive is added via a standard commercial gravimetric hopper just as you would add a colorant into the extruder feed-throat. Our products are usually loaded at 0.7%-4% by weight.
* Biodegradation rates of EcoPure®-treated plastic materials measured according to the ASTM D5511 test method. Tests are generally conducted using 20% to 30% solids content; solids content in naturally wetter landfills range from 55% to 65%, while the driest landfills may reach 93%. Actual biodegradation rates will vary in biologically-active landfills according to the type of plastic used, the product configuration, and the solid content, temperature and moisture levels of the landfill.
View Terms and Conditions
This website contains information based on our current experiences and knowledge. It does not relieve customers of their responsibility to carry out their own tests and experiments on their own. We do not imply any legally binding assurance. Customers are encouraged to be responsible in determining their products do not infringe upon any intellectual properties.
Fill out the form below and someone will contact you very shortly.
View Terms and Conditions
© BIO-TEC ENVIRONMENTAL 2022 | ALL RIGHTS RESERVED | DESIGNED BY BOOST MEDIA
Leave A Comment